Opal quality factors
Individual opals can vary widely in appearance and quality. As diverse as snowflakes or fingerprints, each gem can differ noticeably. There are three main aspects of an opal’s quality:
Color— Background color and play-of-color
Pattern— Arrangement of play-of-color
Clarity— Transparency and quantity of inclusions
HOW TO EVALUATE AN OPAL
Opal evaluation should be done under controlled lighting on a dark background. Rotating the opal against a background helps when you’re determining its type and evaluating its play-of-color and cut.
The Five Steps of Evaluating an Opal
1. Determine the type of opal:
Is it a black opal, white opal, crystal opal, etc.?
2. Determine the ratio and quality of its play-of-color:
Consider the percentage of play-of-color compared to background color, its intensity, dominant hues, range of color and pattern.
3. Determine the opal’s transparency:
Is it transparent, semi-transparent, translucent, semi-translucent or opaque?
4. Determine the opal’s clarity:
Look for the presence of matrix, crazing, pits, etc.
5. Evaluate the opal’s cut:
Consider the opal’s symmetry, thickness, polish, sizing and calibration.
OPAL COLORS
Opal hues can range across the spectrum. An opal might display a single color, two or three colors, or all the colors of the rainbow. Opal displays background color in addition to play-of-color. Background color—also called bodycolor—is caused by the suspension of tiny impurities within opal’s silica spheres.
Opals are often divided into types based on background color. Even though there are many different categories for opals, here are the main five types:
Black Opal
All other quality factors being equal, many buyers favor the dark background color of black opal. This is partly because play-of-color tends to stand out attractively against a dark background. The contrast of play-of-color to bodycolor makes black opals very popular. Additionally, black opals are considered to be the rarest (white opals are more common).
White Opal
An opal with a translucent to opaque white and other light color backgrounds (bodycolor) with play-of-color is called white opal.
Fire Opal
Fire opal is transparent to translucent with a bodycolor that is usually yellow, orange or red. This material, which might show play-of-color, is also known in the trade as “Mexican opal” or “Mexican fire opal”.
Boulder Opal
Boulder opal is translucent to opaque opal with play-of-color within a host rock. Thin layers of opal exist within the host rock (called matrix). The opal is cut with the matrix attached and is part of the finished gem.
Crystal and Water Opal
Crystal opal is transparent to semitransparent with a clear background. This type of opal can show excellent play-of-color. Water opal might or might not display play-of-color. If it does show play-of-color, it is faint and covers only small portions of the gem.
Play-of-color might be the most spectacular aspect of an opal’s appearance. No matter the color or combination of colors, play-of-color must be vivid to command a high rating. In other words, opal lovers prize bright play-of-color over faint play-of-color.
Secondary in importance to play-of-color’s strength is its range. If an opal’s play-of-color is not just bright, but also ranges across the entire spectrum, it’s very rare and valuable. Not every precious opal, however, sparkles with every color of the rainbow. In some, the play-of-color consists of just one main color and two or more secondary colors.
Desirable play-of-color is further broken down by the colors themselves. Traditionally, red is considered the best prominent color, orange the next most desirable, followed by green. However, favored colors can vary with fashion or personal preference.
In addition, an opal’s play-of-color can change along with the viewing angle or type of light. For example, red might dominate in the same portion of an opal cabochon where blue dominates when it’s viewed from a different angle.
The most valuable opals display play-of-color from all angles.
OPAL PATTERNS
Pattern describes the arrangement of an opal’s play-of-color. Like the shapes you see in the clouds, play-of-color takes many forms. Common terms for play-of-color patterns include:
Pinfire or pinpoint: Small, closely set patches of color
Harlequin or mosaic: Broad, angular, closely set patches of color
Flame: Sweeping reddish bands or streaks that shoot across the stone
Peacock: Mainly blue and green
In general, connoisseurs prefer large, closely arranged patches of color over tiny, scattered dots. As with any play-of-color, no matter what the pattern, colors must be bright for the stone to be valuable.
In addition to the arrangement and shape of the play-of-color patches, buyers must consider extinction, or “dead spots,” when evaluating pattern. A dead spot is an area of the gem in which no play-of-color appears and only background color is visible. Dead spots detract from opal value, especially if there are several of them.
OPAL CLARITY AND TRANSPARENCY
With an opal, clarity is its degree of transparency and freedom from inclusions. An opal’s clarity can range all the way from completely transparent to opaque. Experts prize different levels of clarity for different opal types. For example, in crystal opal, experts admire transparency, while in black opal they prefer an opaque background. Each provides the best background for displaying play-of-color in its individual opal type. A cloudy or milky background color lowers the value of any opal. It makes the gem less attractive, and it can sometimes signal a lack of stability.
There are various types of opal clarity characteristics that affect value. Opals, like other gems, can have fractures, or pits and other surface blemishes. An opal might also contain fragments of its host rock, called matrix. Matrix in a polished opal is usually—but not always—detrimental to its appearance and value. It depends on the type of opal.
If an opal loses moisture, it can lead to crazing: a fine network of cracks that resembles a spider’s web. The moisture loss can be caused by heat or excessive dryness, or by exposure to bright light or direct sunlight. Crazing can be prevented by never displaying opals in places— such as window displays—where they’re exposed to these conditions.
Even if cracked opals don’t break right away, they have little durability in jewelry, and the fractures spoil the beauty and clarity of the gem. For quality control, producers and dealers single out opals that they suspect might ultimately craze. Dealers who willingly buy crazed opal do so because it commands a lower wholesale price than undamaged opal. This means they can sell it at a lower retail price level.
OPAL CUTTING
The cutter considers an opal’s color, pattern, and clarity when planning the finished gem. As with many top-quality colored stones, exceptional opals might not be cut to standard sizes and shapes.
Cutters usually fashion exceptional rubies or sapphires, for example, in a way that saves weight or maximizes color— even if the result is an unevenly proportioned gem. In a similar strategy, opal cutters usually cut top-quality rough to show off its spectacular play-of-color.
To achieve this goal, cutters might fashion fine opals into large, irregular shapes that keep as much play-of-color as possible. Designers set these costly one-of-a-kind gems into custom pieces.On the other hand, cutters typically fashion commercial-quality white opal and assembled opal into standard calibrated sizes, usually ovals.
The cut of a fine opal should be symmetrical. If it’s a cabochon, the dome should be well rounded. Domed surfaces give the best play-of-color, and make the stone appear vivid from most viewing angles. If the cabochon is flat, it might be vulnerable to breakage, especially during setting into jewelry. If it’s too high, it might be hard to set in jewelry.
CARAT WEIGHT
Opals come in a wide range of sizes and carat weights. Opal has relatively low density compared to many other gemstones so even larger sizes can be comfortable to wear. Common sizes for many of the opal cabochons set in jewelry are 6×4, 7×5, and 8×6 mm.
The Fire of Australia, a large uncut opal, weighs 998 grams or just under 5,000 carats. South Australia is one of the few places on Earth where opals of this size can be found. Approximately 90% of the world’s opals are from Australia.
ASSEMBLED OPALS
Opal can be fragile. In solid opal cabochons, the gem material is usually thick enough to withstand everyday wear and jewelry repair without breaking. But with thinner material, manufacturers often have to add a rigid backing for durability.
Assembled opals are fashioned opals with backings. They might include materials like glass that aren’t usually part of gem-quality jewelry, but because they are partly precious opal, they still have value as gems. They sell for only a fraction of the price of boulder opals, but they allow manufacturers to make attractive finished gems from thin opal pieces.
The two common types of assembled opal are the opal doublet and triplet. The doublet is a thin layer of opal cemented to a backing. The backing is often composed of obsidian, dyed black chalcedony, black glass, natural common opal, or plastic. The triplet is a thin layer of opal cemented between a domed top of colorless quartz or clear glass and a backing of obsidian, chalcedony, or black glass.
